2" Wide Continuous Hinge - 6' Long - Steel
(27 reviews)
Price: $42.04
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (27)
- Q & A (0)
- Videos (1)
- Photos
Polar Hardware Trailer Door Hinges - H200
- Piano Hinge
- Continuous Hinge
- Steel
- 72 Inch Long
- 3/16 Inch Diameter
- 2 Inch Wide
- Bolt-On - No Pre-Drilled Holes
- Weld-On
- Polar Hardware
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Features:
- Hinge provides sturdy, continuous support along the length of your cabinet door or panel
- Continuous design offers more support than smaller, individual hinges and reduces stress on heavier doors
- 270-Degree rotation for full opening and closing motion
- Weld-on or bolt-on installation
- Bolt-on installation requires drilling holes into hinge
- 16-Gauge steel construction is durable and long-lasting
- Made in the USA
Specs:
- Dimensions: 6' long x 2" wide
- Each side of the foldable hinge measures 1" wide
- Individual knuckle length: 1"
- Pin diameter: 3/16"
831 Polar Hardware Piano Hinge - Steel - 2" Wide - 72" Long
Video of 2" Wide Continuous Hinge - 6' Long - Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Polar Hardware Trailer Door Hinges - Piano Hinge 2 inch Wide by 6 feet Long - H200
Hello neighbors, Steve here with etrailer.com. Today we're taking a look at this two-inch wide continuous hinge, and it is six feet long, overall. Now, this hinge, folks, is gonna provide you a nice, sturdy, continuous support along the length of your cabinet door or panel. And again, this continuous design is gonna offer more support than your smaller, individual hinges. Everything's one single piece, so it's gonna be much, much sturdier. Now this will give you a 270 degree pivot point.
I'll zoom in here and show you that, so it can pivot 270 degrees. That's gonna give you full opening and closing. Now this is a weld-on or bolt-on installation. If you're bolting it on, obviously you're gonna have to drill a hole through it because it is one solid piece, but you can do that and then bolt it on. It is a very sturdy, 16-gauge heavy duty steel.
It's gonna be very durable, long lasting. It's made here in the USA. Again, it is six feet long and it's two inches wide. So each side of this is one inch, so one inch there, and one inch on that side. Now the pin diameter itself is three 16th of an inch, and the individual knuckle lengths are one inch.
So, two of these is one knuckle and that's one inch. Well, folks, that's gonna do it for our look at this two-inch wide continuous hinge, it's six feet long. I'm Steven, thanks for watching and have a great day.
Customer Reviews
2" Wide Continuous Hinge - 6' Long - Steel - H200
Average Customer Rating: 4.7 out of 5 stars (27 Customer Reviews)
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.by: jlk08/06/2016
It all worked as I had intended, although I suppose it would have helped to have pre-drilled countersunk screw holes on the flanges. . .but I guess welding these in place is common.
My old hinge was seriously rusted, but of course the factory welds still held. So after cutting and grinding, I got the door free, drilled some screw (and bolts on one side) holes.
Aligning is always a problem when the hinge flange is hidden when closed. I experimented with blocking the door into the correct position, guessed a little on some screw locations and finally settled on what might work.
Although I have bolt heads visible on the outside, the door works. That's what counts. It is after all a horse trailer! . .
by: Joel p08/15/2017
used two of these to make lid for my trailer work very well and function well in all kinds of weather
Joel P.
8/16/2018
holding up nice. no issues
by: David03/05/2024
Was exactly what I needed, and delivery was very fast
by: Bert02/12/2020
Used them for some tool boxes I built into a flatbed I built for my truck. Make sure you paint them well, they don't have much of a coating.
by: T05/03/2022
Good solid part easily adaptable
T
5/20/2023
The hinge is working really well. I was easy to modify to my needs and is very durable
by: Gerri Builta09/22/2014
I placed my order and was notified within a few hours it had shipped. I ordered a hinge for my horse trailer escape door and rubber bumpers. I ordered on Monday and had my product on Wednesday. ***** 5 Star customer service!
by: Phil H.07/14/2015
Great product. Will be using this to cut to lengths I need to replace hinges on my boat hatches. Will use screws and rivets to mount and can drill holes as needed.Did a lot of searching prior to finding your site. Will be ordering boat trailer parts I see on your site. Looks as if you have everything at one location which is a blessing. THANKS!!!
by: Thomas11/10/2018
I've ordered several things from etrailerand they've all been of quality and exactly as advertised. The prices are very fair and the delivery time has been amazingly fast and faster than most. I'll always go to retailer first, service and products can't be beat!
by: John W07/29/2018
Just what I was looking for. High quality and heavy build. I replaced a RV compartment door that is quite heavy. This hinge was perfect for the job.
by: Dennis 05/20/2021
Continuous 6' long hinge
Customer service was very good.
Item was packed well, shipped and arrived quickly.
Online description included clear, complete dimensions.
by: Curt M07/16/2016
All your products arecexcellent, always use etrailer
by: Dave G.02/13/2015
Order was shipped in a very timely manner. Packaged very good. Ordered with two day shipping and received within a day and a half. Great job. With continue to order from you. Thanks
by: Robert 04/24/2021
Worked great
by: Ron09/02/2015
Good quality hinge. Delivered quickly and in good condition.
by: Klay06/09/2018
Product is what I ordered wish there was more care in the packaging so it would not get damaged during shipment
by: Dave G.03/31/2015
This is the second one that I have used. Both are just what I wanted
by: Jill02/24/2017
I am very pleased with the customer service and the quick delivery of my order.
by: jeff v.01/18/2014
Fast delivery and solid product. Looking forward to future business.
by: Rob S01/14/2016
The item was exactly what I was looking for.
by: John 05/19/2020
Arrived on time. Great quality.
by: Hope03/17/2015
Fast shipment. Exactly what I wanted
by: Glenn06/29/2018
Products arrived fast and in good condition
by: Martin 03/20/2024
by: Richard03/13/2021
by: Stacey 02/06/2023
25
27
Show More Reviews
See what our Experts say about this Polar Hardware Trailer Door Hinges
- Is the Width of the Redline 2 inch Steel Hinge Measured Folded or UnfoldedI spoke to my contact at Redline and he informed me that the 2 inch width is measured when the Redline 2 inch Wide Continuous Steel Hinge # H200 is unfolded.
view full answer...
Info for this part was:
Expert Research:
Jameson C
Installed by:
Steven C
Updated by:
Amanda M
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jim K.
8/6/2017
All well. The rest of the trailer is also holding together . . .